产品中心

PRODUCT CENTER

您现在的位置:网站首页 >> 产品中心>> 焊接变位机
  • 产品名称: 开口式平板对接自动焊接机
  • 上架时间: 2021-01-07 15:11:52
  • 浏览次数:

产品详情

开口式平板对接自动焊接机 
Open type plate butt welding machine automatically
 
保证钢板压平,焊缝采用单面焊接双面成型,焊接变形小,正背面焊缝光洁、整齐、美观,过渡圆滑,正背面焊缝直线度偏差全长范 围不大于±1.5mm,正面余高不大于2mm,背面余高不小于1mm,焊缝宽度5-12mm。 To ensure that the steel is flat,the seam is welded by one side in shape by two sides.There is no minimal deformation.There are clean and beautiful seams on both sides,round and smooth transfers.The deviation on the back side is no larger than ± 1.5mm,with the obverse no larger than 2mm and the reverse side 1mm.The width of the welding seam is 5-12mm.
 
产品介绍 Product Introduction 
平板对接自动焊接机是我公司自主研发的一款较同行业先进的 焊接设备;本机采用气动琴键式压紧装置和以往采用气囊式压紧装 置有了很大改观,是一种质的飞跃;焊缝采用单面焊接双面成型, 焊接变形小,焊缝整洁、美观、过渡圆滑等优点,机架采用钢结构 件,强度高、变形小;进料架、出料架均为万向滚珠式;焊接小车 上装有送丝机、焊枪、焊枪调整机构、提枪滑座等,并配有照明系 统。成型槽材质为紫铜,且两面都加工有成型槽,成型槽采用水冷 方式冷却。本机配有焊缝对中定位装置与成型槽快速脱离装置。 
The automatic flat butt automatic welding machine exclusively designed and developed based on years experience and equipment debugging skills,which brake traditional tank producing pattern.It adopts pneumatically piano-key clamping device.Compared with gasbag clamping device,it improves quality by leaps and bounds.The seam can be welded for one side or for both sides.There is no minimal deformation.There are clean and beautiful seam on both sides,round and smooth transfers.Frame is made up of steel structures,which feature high strength and less deformation.Inlet and Outlet are equipped with universal balls.Welding device consists of wire feeder,torch,torch-adjusting mechanism and slides,etc.And also lighting system has been employed.Red copper is made into molding grooves on both sides.And machine is equipped with center positioning device and fast separation device of molding groove against welding seams.