产品中心

PRODUCT CENTER

您现在的位置:网站首页 >> 产品中心>> 管道自动焊
  • 产品名称: 管道数控坡口机
  • 上架时间: 2021-01-07 13:36:24
  • 浏览次数:

产品详情

性能特点 :
performance characteristics:
性能特点 :
performance characteristics:
在线性能 :较好 (按流水作业在线设备进行设计)
online performance: good (according to the design flow process online equipment)
坡口效率 : ≤16 min /道口 (不锈钢DN600 SCH100即38 . 89mm双V型坡口 )
groove efficiency: 16 min/crossing or less (stainless steel DN600 SCH100 38 . 89 mm double "V" groove)
切割坡口 :先用其它设备如管道切割带锯机进行管子切断 ,才能进行单个坡口加工
cutting groove: with other equipment such as pipeline to the pipe cutting and cutting band saw for processing a single groove
坡口质量 :极好
groove quality: very good
适用场合 :较适用于各种壁厚管道的端面I型、V型 、双V型、U型 (含窄间隙坡口)坡口加工
applied occasion: is suitable for all kinds of wall thickness pipe end type I, V, double v-shaped, u-shaped groove (including narrow clearance groove) processing
使用刀具 :标准刀具 (正方形硬质合金刀12mm*12mm),即可满足I型、V型 、双V型、U型 (含窄间隙坡口)的坡口加    工 ,无需另外定制成型刀具 ,方便快捷 。 市面上其他的坡口机加工双V、U型坡口时 ,需要另外更换自制的成型刀 ,不仅制作费事费力 ,成本高 , 而且效率很低 ,可操作性差
use tool: standard tools (square hard alloy knife 12 mm * 12 mm), can satisfy the type I, V, double v-shaped , u-shaped (including narrow clearance groove) groove processing, without additional custom shape tool ,        convenient and quick . On the market of other pairs of V groove machining u-shaped groove, need to replace
homemade forming another knife, not only to make effort, cost is high, and low
efficiency, poor maneuverability
技术参数 :
technical parameters:
适用管径:2-72寸
suitable diameter: 2-72 inch
适用材质 :碳钢 、合金钢 、不锈钢 、低温钢等
applicable material: carbon steel, alloy steel, stainless steel, low temperature
steel, etc
适用壁厚:0-60mm (理论上实芯管子也可以适用)
wall thickness: 0-60 mm (theoretically solid core pipe can also be applicable)
坡口型式:I型、V型 、双V型、U型 (含窄间隙坡口)
groove type: type I, V, double v-shaped, u-shaped (including narrow clearance
groove)
坡口角度:0-45°可调
groove Angle: 0-45 ° is adjustable
进刀方式 :径向自动差动进刀或轴向数控电动进刀
feed way: radial axial CNC automatic differential feed or electric feed
退刀方式 :径向自动电动退刀或轴向数控电动退刀
return way: radial axial CNC automatic electric knife back or electric knife
驱动方式 :采用电机+减速机驱动
drive mode: driven by motor + reducer
夹紧系统 :左右自动夹紧
the clamping system: automatic clamping
主轴转速:0- 133RPM (变频无级调速)
spindle speed: 0- 133 RPM (frequency conversion stepless speed regulation)
控制系统:PLC控制,7寸彩色触摸屏 ,人机对话模式
ontrol system: PLC control, 7 inches color touch screen, man-machine dialogue
mode
设备安装 :可实现无基础安装
equipment installation: no base installation can be realized
动力头滑台 :主动力头前进 、后退
power head slider: positive forces entered into, backward
液压夹紧机构 :液压马达夹紧
the hydraulic clamping mechanism: hydraulic motor clamping
液压泵及控制装置 :调节液压压力等功能
hydraulic pump and the control device: adjust the hydraulic pressure, etc
坡口能力:1000寸径 (达因)/日(单班8小时)
(按照不锈钢DN600 SCH100即38 . 89mm双V型坡口 ,或者按照碳钢DN200 SCH40 即8 . 18mm U型坡口计算 , 即在不同工况 条件产能都能满足)
groove capacity: 1000 inch diameter (dyn)/day (single class 8 hours)
(in accordance with the stainless steel DN600 SCH100 double "V" groove is 38 . 89 mm, or according to the carbon steel DN200 SCH40 u-shaped groove calculation is 8 . 18 mm, namely capacity in different working condition can be satisfied)